NPACK

Plastic juice bottle caps lifting feeder capper equipment

Home »  Products »  Filling Machine »  Plastic juice bottle caps lifting feeder capper equipment

plastic juice bottle caps lifting feeder capper equipment

Description


Notification prior to starting the bottles capping machine model NPACK-AC50 Automatic bottles capping machine with caps bulk elevator feeding system rotary type

1:Before the machine is plugged in, make sure the power switch is in the closed state, and then follow the instruction.

2:If the machine does not run in a long time, it should be wiped with a piece of dry cloth and must not be cleaned with any corrosive cleaning agent.

3:It is strictly prohibited to spurt any liquid into the electric box of the machine, so as to avoid corrosion to the internal electrical components and cause short circuit.

4:Check according to the equipment packing list models, specifications and quantity of the equipment and materials to make sure that they meet the requirements of design and product standards and accompanied by certificates of conformity.

5: Check the appearance of the equipment to make sure that it is free from any deformation, damage and corrosion, and all spindles that they should be flexibly rotating without any blockage.

6: This machine is working under single phase AC 110V, and the flat 3-legged power plug should be plugged into the power socket with a ground wire.

Technical Parameters of model NPACK-AC50 Automatic bottles capping machine with caps bulk elevator feeding system rotary plastic juice bottle caps lifting feeder capper equipment:

plastic juice bottle caps lifting feeder capper equipment1

Model NPACK-AC50
Capping speed:15-30 pieces/min
Rated voltage:110V/60Hz(US Standard)
Machine Power:0.8KW
Ampere:2.2A
Exterior dimension:2230*1460*1600 MM(L*W*H)
Air Pressure: 0.7 MPa
Weight: About 300 KG

Capping machine in details:

plastic juice bottle caps lifting feeder capper equipment2

plastic juice bottle caps lifting feeder capper equipment2

plastic juice bottle caps lifting feeder capper equipment2

I.Structures of the machine:

plastic juice bottle caps lifting feeder capper equipment5

Ⅱ. Optical fiber electric eye description

1.electric Eye to detect bottles:

plastic juice bottle caps lifting feeder capper equipment6

►When it is operated in automatic mode, the purpose of this electric eye is to detect incoming
bottles.
When the incoming bottle is detected, the "turntable" rotates.

2. Lid-delivery electric eye

plastic juice bottle caps lifting feeder capper equipment7

►When it is operated in automatic mode, the purpose of this electric eye is to detect incoming covers.

When the incoming lid is detected, the "taking-out mechanism" rises for taking material.

3. Lid-delivery electric eye

►When it is operated in automatic mode: The purpose of this electric eye is to detect incoming bottles.

When the incoming bottle is detected, the "lock cap mechanism" rotates the lock cap downwards.

Ⅲ.Switch button and wiring port.

1.Touch screen and emergency stop

plastic juice bottle caps lifting feeder capper equipment9

2.Feed motor and lid vibration plate controller

Vibration plate controller

Vibration plate controller: By adjusting the voltage, adjust the discharging speed.

3.Power switch and sockets

4.Motor controller

Frequency transformer: By adjusting the frequency transformer button, adjust the motor speed.

Ⅵ.Maintenance on model NPACK-AC50 Bottles capping machine

plastic juice bottle caps lifting feeder capper equipment14

1、It is necessary to check and maintain the machine to elongate the machine and optimize the function of machine;

The working machine should be maintained every three month; The bearing and gear transmission part must be lubricated with the grease; The lubrication must be done periodically; The slide way oil (N68) should be added into the part like reciprocating mechanism motion or lifting two times every day; The automobile oil(N68) should be added into the rotary or swinging parts; Every half month add the grease into the cam slot; Every month one time for oil nozzle by adding the grease;

2 Never use metal tools to hit or scrape the surface where the bonding is conglomerated on the parts like components or mold.

3.If the machine stops running for a long time add the grease for lubrication in the parts like transmission or bearing part; Also treat the machine with water-proof protection。

4 Never put any objects on the machine lest it damage the machine.

5. Clean the dust inside the components periodically also check all the screws and fix any screw loosened.

6. Check the screws in the terminals for wiring at a certain time and be sure the screw is fixed;

7.Check if there be any loose station in the stretched wiring path from the electric boxes ; If the part is too loose re-fix the screw in order to avoid the abrasion or damage in the insulation layer which may cause the electric leakage;

8. Check the easily-worn pats and change the damaged one on time;